Tuesday, November 20, 2007

Check out this Day-After-Thanksgiving Stew Recipe

This sounds like an really tasty recipe for a Mexican style beef stew provided this week to National Cattlemen's Beef Association members. Check out those ingredients and add them to your grocery list, sounds like a winning combination of seasonings. For the less adventurous, a good old-fashioned soup bowl should work just fine. . . .

Easy Day-After-Thanksgiving Stew

Wondering what to serve the day after Thanksgiving to a houseful of hungry family looking for an encore? Whip up hearty Mexican Beef Stew to satisfy those day-after stomach grumblings!

Mexican Beef Soup in Tortilla Bowls

Prep time: 25 minutes
Ingredients:
1-1/2 pounds lean ground beef
1 large onion, cut lengthwise in half and cut crosswise into thin slices
1 tablespoon ground cumin
1/4 teaspoon pepper
2 cans (10-1/2 ounces each) beef consommé
1 can (15-1/4 ounces) whole kernel corn, drained
1 can (10 ounces) diced tomatoes with green chilies, undrained
1 cup water
6 medium (8 inches) flour tortillas
2 tablespoons chopped fresh cilantro

Instructions:

Heat Dutch oven or large saucepan over medium heat until hot. Add ground beef and onion; brown 4 to 5 minutes, breaking beef up into 3/4-inch crumbles. Pour off drippings. Season beef with cumin and pepper.
Stir consommé, corn, tomatoes and water into beef. Bring to a boil; reduce heat to low. Simmer, uncovered, 10 minutes.
Meanwhile gently press tortillas into 6 individual microwave-safe (2-cup) soup bowls. Microwave, 3 bowls at a time, on HIGH 5 to 6 minutes or until tortillas are slightly crisp, rotating and rearranging cups halfway.
Stir cilantro into soup; spoon soup into tortilla bowls. Garnish as desired; serve immediately.

Makes 6 servings.

Nutrition information per serving: 478 calories; 19 g fat (6 g saturated fat; 8 g monounsaturated fat); 76 mg cholesterol; 1102 mg sodium; 40 g carbohydrate; 2.6 g fiber; 34 g protein; 5.6 mg niacin; 0.4 mg vitamin B6; 2.4 mcg vitamin B12; 4.6 mg iron; 20.8 mcg selenium; 5.8 mg zinc

Sunday, November 18, 2007

Traditional Breed Beef (British White) and Pork in Demand in England

Traditional Breed Beef and Pork in Demand
05/09/07

(Excerpt - Please follow the link above for the full text of the article)

“Shaun bought the British White cattle because they were a traditional breed and he felt there would be a market for them. Also, at the time he was running the farm on his own and the cattle are naturally-polled and are easily handled.

“At the time the breed was classified rare but now the Rare Breeds’ Survival Trust has them on the minority list with around 1,500 breeding females in the country.

“The Middle White pigs are an endangered breed and the Saddlebacks which came last year are classified as at Risk by the Rare breeds Survival Trust.”

British White cattle at
Savin Hill

All Cattle born at Savin Hill are finished on the farm at between 24 to 30 months old and such has been the demand for the meat that the Partingtons have developed good relationships with other British White breeders around the country who now supply them with finished animals to the same standards as their own.

“We were unable to cope with the demand for beef with our own cattle and by taking them off other breeders this has encouraged people either to expand their herds or to go into the breed.

“Our over-riding philosophy with the business is about pure traditional native breeds and sustainably farming in this country which is something that a lot of people are struggling to do in the current climate of change.

“By us creating a market for a quality product, consumers can support these breeds and hopefully encourage sufficient numbers of the animals and make it viable to farm them in this country.”

With the cattle taking at least three years to produce (from conception to the final cuts of quality meat), the small acreage at Savin Hill has not been able to cope with the demand, but the faster turn-around time for the pigs has enabled them to develop this side of the meat business. “We have won several awards for our Middle White home-produced pork which is all born, bred and reared on our farm”. Michelle and Shaun Partington
with Middle White piglets

Pigs are eight to 10 months old at finishing with the Middle Whites weighing 65-80kg and the Saddlebacks will be 85kg-plus.

Meat has always been sold direct to get the best price through farmers’ markets and fine food fairs in Lancashire and the Manchester area and now there is an increasing demand for wholesale meat direct to restaurants which Michelle plans to develop.

On average, one head of Savin Hill's cattle is put through the system each month but this can rise to up to 10 during November and December when other breeders help meet the demand.

A further six pigs on average are used each week.

Michelle’s partner Paul Etherington, who has 20 years’ experience as a butcher, cuts the meat in the on-farm premises to include shin, skirt, loins, legs and belly.

Quality ready-prepared meats are also sold such as loin of pork stuffed with basil and fresh sage, pork fillets wrapped in pancetta, stuffed belly pork with apricot and ginger.

The Saddlebacks are used for bacon and their trim is used in the sausages which have around a 90 per cent meat content. They are made without preservatives or artificial flavourings and colourings.

Meat from the Middle Whites, a traditional pork pig, will continue to be used for the fresh pork cuts and the trim will go into speciality pies including Pork and Lyth Valley Damson.

“We all love to eat good food – it’s an important thing for us. My mum’s side of the family were in farming. Her grand-parents used to sell eggs and milk on Blackburn market.

“We have been brought up to think that quality food is important. These days there are too many flavour enhancers, artificial preservatives and colourings being used in foods,” says Michelle, who enjoys being able to talk to her customers about what is in their products and how the meats are naturally-reared.

Sunday, October 21, 2007

A British White Bull Gets Himself in a Bit of Jam

Unfortunately, google blogger is having problems with photos posting, so this pic of JWest's Mazarati in quite a pickle is just an X on your screen most likely.
This picture was Sunday a week ago today, and it was, as is often the case, a weekend just as busy as a week day. Mazarati, better known by the nickname Mo, had made his way along a puzzling course in the hay barn, until he'd reached a dead end -- much like a maze meant for humans that takes many attempts to find the right course out. Unlike a person, Mo couldn't figure out that if he just took those same steps backwards he would be able to find his way back to the beginning. It could have been a disaster, fortunately, he was not injured.

Amazingly, he was quite calm about the whole ordeal; though his new owner, Carol Diodene, would agree with me that he wasn't exactly happy -- his eyes were quite a bit rolled back as tried to look up at us. The first question a cattle rancher would be sure to be asking themself right now is how did he gain access to the hay barn. Well, that would be my fault; and, yes, I am generally a stickler about those gates always being secured even if you are quite sure you'll go right back through that gate within minutes. But, the day before I obviously failed to do just that.

Another herd bull, King Cole, was headed to his new home in the Canton area on Saturday morning, and I opened the hay barn to get a hefty handful of alfalfa droppings from the floor of the barn to use to coax him on into the pens -- and I didn't go back and close the gate, it was merely pushed together, and thus a perfect trap for an unsuspecting cow or bull with access to the corral that adjoins the hay barn. And of course Mo and the two bred heifers leaving for Ocala, Florida had access.

I can't tell you how happy I was to see Mo stroll out of that hay barn with no obvious injury from his ordeal. Two 16' high stacks of 4x4x8 alfalfa bales had to be removed to give him a way out. With all but the bottom row removed, Gentle Mo didn't lunge at the open space as I feared he might -- I could see how easy it would be for him to now try to climb over that remaining 4 foot high bale, but he didn't. Perhaps it was because Carol and I were patting him on the head and telling him to just wait a bit longer, or perhaps it's because he is a British White and his calm disposition saved his life from serious injury while trapped and during his release.

Most amazing perhaps is that Mo didn't bolt out into the corral following his release. He merely strolled and inexplicably stopped to munch on one of the alfalfa bales that had been removed to give him passage out. Carol was great through the whole ordeal, and convinced that this was surely a sign that Mo was meant to join her farm in Ocala, and I think he was as well. He arrived safely at his new home the following day, along with a pot load of great females that Carol found at the British White and Lowline auction in Henderson that weekend.

Monday, September 3, 2007

Calf Birth Weight - Actual versus Tape Measure


A Truly 'laboring' Labor Day weekend!


My fall calving got started this past few days, and because one of the calves born was so very small I decided to try out a set of old bathroom scales that have a big platform and an elevated dial with big numbers for viewing weight results. This little heifer calf was a surprise finding on August 30th when the Animal Compassion Foundation was having another visit with my herd. Anne was thinking on her feet and volunteered her belt to use to measure the newborn and a pen to mark the spot. She was obviously a very little girl, and I ventured the guess that she couldn't weight more than 45 pounds.

We got back to the house and measured Anne's belt and found that she had measured 24 1/2 inches around, and it was a good snug belt measure around her heart girth, the little heifer was totally interested and cooperative. I figured the belt measure probably, because it was a thick leather belt, added some length to the measurement, and later on that evening I went out and measured her again with my tape, and I measured her at 24 inches. While 24 inches got her closer to the mark when you use the tape conversion chart in the Breeder's Guide, I still wasn't convinced that her actual weight was 51 pounds, which is what you get when you use the 4.5 pound increments to back into an off the chart 24 inch heart girth.

The following day I decided to try out my old scales on this little heifer. I found a light weight section of that stick on the floor tile type stuff in the barn, and decided that would work fine. It was nice and sturdy, yet was very manageable. I put the section of floor tile down on the ground, put the scales on my new weighing platform, and weighed her and myself twice for good measure. She was an exact 40 pound little heifer. The difference of 11 pounds is very significant, that is over a 25% error in birth weight estimation.

I decided to go through this same process with each of my newborns. Besides this little heifer, I had four other calves born August 30th through Sept. 2nd. Of those three of them were cooperative, the 27 1/2 inch bull calf born on August 30 to Hill's Dana already found it too much grand fun to scamper about for me pick him and get an actual weight.

August 31st a heifer calf was born to MsRae. She measured 26 inches, and per the tape conversion chart should have weighed 60 pounds, but in fact she weighed more! She had an actual weight of 65 pounds. I also had Mike confirm these same results himself, and it was an accurate weight of 65 pounds -- and she is pictured here.

September 1st a bull calf was born to Madonna (and I actually happened to be out at pasture hanging around in the Ranger and she calved about 40 feet away from me!). This bull calf measured 26 1/4 inches, and had an actual weight of 60 pounds. So in this instance the tape conversion to weight was quite acceptably accurate, and again I had Mike duplicate the weighing process for confirmation.

Then on the afternoon of September 2nd, Polly (pictured here to the right)decided it was time to calve. This calving went on for a bit too long for my comfort, I even called to try to reach a vet just in case I had a problem on my hands. But in between rushing to the house and calling the vet and leaving a message of impending problems, she had delivered a healthy bull calf. (So of course I rushed back to the house and left another message for the vet that all was well!) I tape measured this newborn at a whopping 27 1/2 inches, and had Mike confirm the tape measurement as well this time. We both weighed the little guy and he weighed all of 60 pounds. But, per the tape conversion he should have weighed about 67 pounds -- a greater than 10% error, which in this business is a highly material error.

So what does all this mean to the breeder who relies on tape measure conversion to estimate weight? It means you probably ought to be getting some actual weights as well until, or if, you feel comfortable visually estimating weight and understanding how the tape should perhaps be adjusted for what your eyes tell you.

As well, it could be that I don't handle the tape measure properly. With that in mind, if I haven't been pulling the tape snugly enough around the heart girth then I have a whole lot of historical birth weights that are over-estimated. However, the results from the little study shown here indicate the tape can create error both on the high and low side. I am going to continue to both use a tape measure for weight and get an actual weight with the remainder of my fall calves to get a sense of the average error rate as well as try to understand why.

Earlier I mentioned that Polly (who is also a first calf heifer) was having a more lengthy birth than I like to see. She actually was effectively yelling with her efforts, so I was even more alarmed. It's very unusual for any of my cattle to get vocal over calving. Polly's bull calf measured 27 1/2 inches, yet it only weighed 60 pounds. So, what was structurally different in Polly's bull versus Madonna's (also a first calf heifer) bull that would create an error using a tape measure? To my eye he has wider shoulders and is thicker through the heart girth, a deeper little guy -- yet at a glance looks about the same size/stature as Madonna's 26 1/4 inch bull. So obviously the confirmation of the newborn has a great impact on using a tape measure for an accurate birth weight.

MsRae's heifer is an example of the error to the light side using a tape measure. She weighed a full five pounds more than the tape measured estimate. Why? Perhaps because she has good balance all over, her dam certainly does. How does the tape measure consider a deep evenly made newborn that extends on through to the hind quarters? I don't think it can.

Regardless, I'll continue this small study of tape versus actual weight and see what the final results tell me about my own errors in tape measuring as well as errors due to the actual structure of the calf, and periodically update those results here on my blog.

Saturday, August 25, 2007

British White Beef Cattle - Environmental and Nutritional Effects on Beef Tenderness, Marbling and Overall Palatibility

J.West's Big Mac, British White bull calf sired by Elvis
Beef calves fed on 100% high concentrate grain from weaning to finish in a feedlot environment results in the least desirable beef eating experience for the American consumer, and the least desirable muscle to bone ratio in the final carcass, which directly impacts the end revenues of the beef industry. Conventional high concentrate grain feeding, from the zero pasture stocker phase on through to the continued high concentrate feedlot and finish of beef calves, is often perceived or touted as the only course of feeding that will result in tender, well-marbled beef in an animal genetically predisposed to marble well. The result of a 2002 study funded by Beef Checkoff dollars and conducted with the oversight of the Texas Beef Council suggests that is not the reality.

With the current corn ethanol craze and subsequent corn production targeted to fuel the new corn ethanol market, many cow/calf operations are re-evaluating the cost/benefit of their programs. The majority of cow/calf operations in the United States that provide beef to the American consumer are small shops bringing fifty or fewer beef calves to the local market annually. Browsing through this Texas Beef Council study conducted by Texas A&M one realizes that corn, or any grain, can be largely side-stepped for the majority of the beef calves life when there is ample grass and legume pasture available.

While this study has a bit of age on it, it remains the only study sponsored by the Texas Beef Council with the goal of evaluating various backgrounding scenarios and their impact on Tenderness, Marbling, Palatability, and other sensory factors involved in the enjoyment of a beef steak. The eight study groups were located in three distinct geographical areas of Texas in the interest of evaluating the impact of environment on the final carcass attributes. The East Texas studies conducted in Overton, Texas out-performed the other groups in many key areas: finish weight, ribeye area, and backfat thickness.   

This 2002 Texas A&M conducted study evaluated eight different pasturing and feeding regimens to try and understand nutritional and environmental factors that impact variability in Texas beef. While the stated focus was primarily carcass tenderness, the results provided insight into all the desirable primary attributes of beef. Of the eight study groups, the "McGregor-Calf Fed" (MCF) group receiving high concentrated grain rations from weaning to harvest scored the poorest in many key areas -- but perhaps most surprising was the detrimental impact on ribeye area, backfat, and finish weight. All of these attributes were noticeably deficient in the MCF group in comparison to the Overton/East Texas and Uvalde/South Texas study groups which were backgrounded on pasture and finished the final approximately 4 months on high grain concentrate -- with the East Texas study groups providing significantly superior results overall.
J.West's Elvis, British White Bull

There are two major factors in a consumers enjoyment of beef -- Tenderness and Marbling. The primary stated focus of this Texas Beef Council study was carcass Tenderness. While all study groups were within an immaterial range of one another for initial Tenderness scoring, the MCF high concentrate (post-weaning to finish)group had the actual least tender carcass upon initial harvest than any of the other study groups.
After 14 days of aging the Tenderness scores were comparable across all study groups.


What is significantly missing from this reported study is the sire parentage of the many groups. We are told that Half-blood Bos indicus (Brahman)-influenced steers raised at the Agricultural Research Center, Texas Agriculture Experiment Station in McGregor, Texas were used in this study to understand the impact of environment (south, east and central Texas) and nutrition (low versus high grain supplementation) immediately post-weaning and prior to feedlot feeding on the growth, composition and eating characteristics of beef, but we are not told if the steers in all study groups were half-siblings, sired by the same bull. This is critical information, inexplicably withheld, for purposes of evaluation of the final, very comparable, results across the board for Tenderness and Marbling.  

At the time of this 2002 study the calcium dependent protease inhibitor, calpistatin, had been identified as a key component present in a live animal that greatly increases that animals genetic potential to express Tenderness in the final carcass product. Today, a cattle rancher can pull a few tail hairs and send them off for genetic testing to determine whether his prize bull or cow has the genetics to potentially produce a tender as well as an optimal marbled carcass in their offspring. This genetic testing has become an invaluable tool for seedstock producers seeking to create key bulls and cows that will produce offspring that will excel in the commercial beef market for Tenderness and Marbling.

However, despite this stated fore-knowledge of the impact of Calpistatin, one of two key genetic attributes for Tenderness known today in the year 2007, the results of this study cloud the impact of Calpistatin on the study results. One is left with the sense that the genetic comparability of the steers evaluated, which is a stated parameter of the test, is the driving reason for the comparability of carcass Tenderness scores. While the study addresses and theoretically evaluates the Calpistatin in the resulting beef carcasses, it mysteriously couches the tested Calpistatin results in non-layman gibberish and declines to even address its existence or significance in the final narrative summation of results -- it is found only in the summation charting. As all carcasses resulting from this study had comparable Tenderness scores via Warner Bratzler Shear Force measures, it may be that the presence or absence of the identified Calpistatin gene had no material impact on actual carcass Tenderness.
J.West's Blossum, El Presidente sired British White Heifer

Perhaps of even greater interest are the Marbling scores of the study groups. Despite backgrounding via rotational or continuous grazing in either North, South, or East Texas -- or no grazing as is the case with the high grain concentrate from weaning to finish MCF group -- marbling scores in all study groups were not materially different. However, the MCF group had significantly higher percentage carcass fat scores over all other groups, which is undesirable in today’s market and had no additive impact on actual Marbling scores of the final beef product compared to the others, and thus no positive impact on the final value of the beef carcass -- the excess fat is waste.

Of major importance to the beef cattle producer would be the expense of the constant level of "high concentrate" grain feed from weaning to finish of the McGregor-Calf Fed (MCF) group -- which had the lightest finish weight, and as well the highest fat percentage of the harvested carcass weights. While the MCF group had comparable marbling to the other groups, the higher fat level/percentage to accomplish this feat is essentially money down the drain for packing shops such as Cargill or Smith & Company, as well as for the feeder and cow/calf producer who so costly and conscientiously kept that supplemental "high concentrate" grain at the ready in their post weaning/backgrounding phase of production that they perceive should result in their highest profit at the local auction barn or via a direct order buyer.

Today, beef cattle producers are faced with increasing costs of corn. If the corn ethanol craze continues unabated in the coming years, the ease and value of shoveling corn at a growing calf will be re-evaluated for the ultimate financial gain to the beef producer, stocker, and finisher. The use of genetic testing for inherent ability to produce a Tender and well Marbled carcass will become one of increasing importance as reflected in the results of this Texas Beef Council sponsored study.
The day is likely well in hand when the small beef producer, the primary entity that grows our beef in America, must evaluate the financial pros and cons of raising their calves on expensive corn or other sundry grain mixes, or the less costly raising of their calves on pasture grasses and pasture legumes that provide both the major beef packing houses and the American consumer with an end product that has less fat and comparable to greater muscle, marbling, and tenderness on a higher nutritional plane than that of 100% grain fed and finished beef. 

The small shop beef producer who raises a high end, healthy product has only one primary venue for realizing the value that should be derived from their superior beef product, and that is the direct marketing of wholes, halves, splits, or pre-packaged cuts of their beef. While this is measurably a quite profitable venue, there remains the fact that many beef consumers have neither the time, the space, or perhaps the funds to purchase healthy, clean beef in bulk in this manner. It will be the small shop grocery markets that will on the front end provide a venue for the sale on a larger scale of this superior healthy beef product.

Of perhaps even greater difficulty to the small shop grassfed beef producer, at least in this part of Southeast Texas, is finding an abattoir that is either State or USDA licensed. They are as few and far between as a cow having triplets. So a rancher producing healthy grassfed beef for the local Southeast Texas market has no retail venue to market that beef -- they are forced to sell it on the basis of hanging weight at a less than desirable slaughterhouse to their customers. Many times it matters not how much the need for aging, whether grain finished or grass finished, is important to the optimal result for the ranchers' customers. If the person in charge in the local butcher shop doesn't wish to age a carcass, or doesn't think/understand that it serves a purpose anyway, the customer gets the news when they arrive to pick up their beef --- and worse, the beef producer ultimately hears from an unhappy customer.

Maybe it is time for apartment architects, home architects, to begin to consider in their designs the presence of a large deep freeze as an integral part of home design. With this in place, more consumers who desire a healthier beef product will have the space readily at hand to store for a season the beef they wish for themselves and their family to consume as a staple in their diet.